Standard Equipment

• Aluminum extruded rail
• Continuous pressure buttons
• Mechanical access ramps
• One deflector sheave
• Cable driven unit
• Safety underpanel sensor
• 2 grab rails on car
• Keyed call/send controls on platform and at each landing
• Safety Brake
• Wall mounted call / send controls
• Obstruction sensors
• ABS plastic carriage covers
• Textured anti-slip surface on platform and ramps
• Car folds within 11" (279mm) of wall

Optional Equipment

• 3-position manual safety armrests
• Motorized 2 position safety armrests
• Fold-down seats with safety belt
• Powered fold platform
• Touch sensitive plate on the access ramps and under the platform to stop the lift if an obstruction is encountered
• 12 volt battery operation
• Hand-held pendant control on the platform
• Split rail
• Drive cabinet at top landing
• Audio visual alarm
• Motor with electro-mechanical brake
• Emergency stop switch
• Custom color
• Post for call/send station
• Outdoor package
• Zero clearance at top landing to avoid landing door
  (Not available on Plus model)
• Fire service function
• Pre drilled guide rail for masonry walls
• Joined guide rail for ease of access on narrow sites
• Self-support posts
• Manual lowering device
• Three (3) sided access to platform with motorized lateral access ramp
• Flush cabinet at front or back of rail (Plus system)
• Self-support posts

Specifications

• Platform Dimensions:
  
  • Type I: 27.50" x 36" (700 x 914 mm)
  • Type II: 28.50" x 44" (724 x 1,118mm)
  • Type III: 30" x 48" (762 x 1,219 mm)
  • Type IV: 30" x 44" (762 x 1,118 mm
  • All platforms have non-skid surfaces. The platform can be folded manually or with the help of an optional power-fold platform. Once folded the unit uses very little space in order to leave the staircase virtually unobstructed.
• Access Ramps - Two positive action automatic access ramps for straight or 90° entry
• Motor Assembly - 110 VAC, ½ hp (373 W), 1,750 rpm / gear reducer: 50:1
• Type of Drive Unit:
  
  • Standard system : Aircraft cable 3/16" (5 mm) with breaking load of 4,200 lbs (1,950 kg), deviator pulley and winding drum in a machine room.
  • Plus system: Roller chain #50 and aircraft cable with breaking load of 6,100 lbs (2,767 kg). The electric motor gear reducer and controller are self enclosed at the top landing in a drive cabinet. No machine room required.
• Controller - Meets CSA and ETL standards - 24 VAC operating controls
• Power Supply - 110 VAC, 1Ph, 60Hz, 15 amp
• Rated Speed - 14.0 ft / min. (0.071 m / s)(approx.)
• Capacity - One person in a wheelchair
• Rated Load - 450 lbs (240 kg)
• Operating Controls - Continuous pressure directional buttons are installed on the platform with a key switch for increased safety. (*)
• Call Stations - Continuous pressure directional buttons are installed at each landing
• Finish - One coat of primer and two coats of beige acrylic urethane paint on all steel surfaces.
• Safety Features - Automatic dual access ramps, mechanical emergency brake in case of drive system failure, slack cable switch, keyed continuous pressure controls and upper / lower limit switches are standard features on this unit
• Backed by the Savaria Concord Limited Warranty wich covers the repair or replacement of any defective parts for a period of 36 months from date of shipment